With INCI SATIN, very attractive and homogeneous Satin Nickel coatings are obtained on copper, steel, brass and nickel coatings. It is an extremely stable process and has a wide working range. A minimum thickness of 6 microns is sufficient for a homogeneous satin look.
Since it has a very good leveling feature, if polish marks are desired, polishing should be done before coating with 180 grit sandpaper. .
INCI SATIN S -222 MATTING.
INCI SATIN D-122 CORRECTOR.
INCI SATIN T-322 CARRIER